Machine Plastering, UK Construction Industry Suppliers.
Let your next step be to gain the advantages of machine plastering and machine application for all your plastering and screeding needs
Machine Plastering will save you time and make you money. At UTIFORM our objective is to solve your on-site problems. With our many years experience in machine plastering we are able to get companies up and started as painlessly as possible.
With the ever decreasing labour pool available, plastering and screeding machines are all about increasing the output of your skilled men. Do they work? With over one million units sold in Europe there can be no doubt this is the future.We believe that here at UTIFORM we have the solution. We have a range of machines to suit all applications and sizes of contract. From extensions to large scale wet plaster jobs, plastering machines are the way to increase your profits.
Plastering machines do not plaster any thing by themselves. They mix, spray and apply wet materials onto the wall, floor or ceiling. You still need skilled plasterers to straighten and finish the wet plaster. However by mixing and spraying the wet material you take away so much of the manual side of the work, leaving your skilled men doing what they are good at, looking after wet plaster as it goes off!
Whether thin coat finishing plasters or site mix sand and cement, we have the machine for you. Naturally nearly all pre-blended and bagged materials sail through our plastering machines with ease!
People ask: “How much can a plastering machine do in a day?”
The answer is: “How much wet material can the plasterer cope with in a day?”
We guarantee the machine can spray far more.
Every single day you can turn on your plastering machine and achieve far, far more than you ever did by hand. Try it and see for yourself…
We are experienced in both hand and machine plastering, and we are familiar with the problems you encounter on a daily basis on-site. We offer practical solutions to all that you are likely to come across in the evolution from hand to machine plastering.
We no longer work as plastering contractors and offer you no competition in the market place. We are here just to help you with the transition.
We offer training facilities that cannot be matched. Some plasterers need three hours help to start, some need three weeks. Whatever the duration, our skilled and experienced staff are available to help you get started.
We also offer a full phone back-up service for all our customers should things happen you are unfamiliar with. We find that all it ever takes is a couple of minutes on the phone to get you spraying again! Should this not be enough we have ten trained engineers available throughout the UK to assist with any mechanical problems. Although in truth mechanical problems are extremely rare with our equipment.
Our German engineering and after sales staff have over forty years experience in the design and building of construction pumps. Our experience tells us that simplicity is the key to the efficiency of these machines.
Dear sir
Good day
I visited your web site and I need to provide me the price for plastering machines which model you have available and which model could be use in huge project ,medium and small project .
Hope to hear from you soon
tayseer al ashqar
cell : +966540060090
Dear sir/madam,
Good day to you!
We are interesting your sprayer machine.
Our interesting plaster sprayer machine can be to spray 0-0.5mm breakstone fibre can exit from the nozzle and tube.
And we will spray 3-5cm thick material to wall and ceiling
One cubic meter character is following:
- 160 liter water
- 360kg cement
- 1600kg breakstone fibre+ some addivities
- VOLT 280 or 380
- Tube long -40m
- Capacity of material – up to 80kg
If you have proper ones for our interesting please send me more inform and EXW price offer urgently.
Looking forward your urgent reply
Sincerely
Aagii
Can you send me a few more specifics. I have a project for constructing several 2-storied units My requirement is for a heavy duty machine that can throw plaster up to a height of about 20-22 feet for outer finishing. I do not use a pre-mixture, but have a sand-cement mixing requirement. Some kind of a quote will also be appreciated along with current availability of the machine.
pls i need mor information & details+DAILY COVERAGE PRODUCTION & PRICE
Hi
Iam interested in purchasing a plastering machine
please contact me
kind regards
Jeeva Reddy
Solicito preço da máquina.
Solicito valor da máquina de projeção de gesso e argamassa
Sir,
Can you please explain in brief how actually it works its cost, and some working snaps
Thanks
Greetings
im ahmed raga from Sudan I Protect I kindly request i need details of machin and price
and tech data sheets
I work on mashine plastering over 4 years.We use pft g5c and baumit.
Can ya help me to find more walls to plaster in Europe.
Thanksfull Bosnic Dusan
18000 Nis
Serbia
Milorada Veljkovica Spaje 25/4
I stumbled on your site and am quite interested in your plastering machine. can we get talking on this?
Hi i am thinking of buying one of your plastering machine how much and do you sell 2nd hand or ring me on 07711839940